Automations in the new app don't have a way to say "if open for X minutes". If the SmartThings Multipurpose Sensor didn't connect to the Hub when you removed the pull-tab, reset and connect the device manually. To my utmost surprise, two of my multipurpose sensor are “OFFLINE”. RELATED. Add a little smartness to your things.If so, then they use coin batteries that can be a little finicky, especially since the replacement battery for some sensors are very specific (must be Duracell and not Panasonic, etc).Their internal metal contacts can also be a PITA because sometimes they’re not able to touch the battery properly. Thanks for the suggestion I should have tried it before posting or contacting the support
It’s keep on blinking red and green even when I hold down the reset button for more than 5 seconds with the sim ejector tool. Login to my Samsung account and it doesn't list the hub device. Press question mark to learn the rest of the keyboard shortcuts SmartThings Multipurpose Sensor $ 19.99. I’ve also used a sharp pointed tool to slightly bend those contacts to make sure they touched the battery.What you can try to do with the nonworking sensor is to put that known good battery back in and move it around (especially sideways and down where the contacts are located) to see if you get the LED to turn on. They work pretty much ok if they are in the same room, but as soon as I put them behind a wall (any wall), even if it is 1 metre away, … I have 8 ST multipurpose sensors, and for more than a year everything was working perfectly. I recently bought a used SmartThings Hub v2 along with two multipurpose sensors and a motion sensor (the squared one with the sensor in the corner). If your SmartThings Multipurpose Sensor or SmartSense Multi is stuck in a particular state, there are a few options you can try to correct it:. I’m having a hard time connecting my Multipurpose sensor top the smartthings app. Replace the batteries (1 CR2450 battery for the SmartThings Multipurpose Sensor; 2 AAAA batteries for the SmartSense Multi). The problem I have is that all these sensors have an astonishingly short range. If that happens then you’ll need to 1) tweak those metal contacts, or 2) shim the battery, or 3) try a different battery manufacturer.Good news, I fiddled with the battery and the LED came on! Thanks for the suggestion I should have tried it before posting or contacting the support Note: The SmartSense Open/Closed Sensor is compatible with the SmartThings Classic app. Remove and reconnect your SmartThings Multipurpose Sensor or SmartSense Multi with your Hub. I want to be reminded if the mailbox is still open (most likely because the mail sticks out of the box so everybody can see it)My notes from when I set this up (using the"Classic" app if it matters):Dashboard > Smart Home Monitor > Gear Symbol > Monitor for "Custom", Sensor Opens (for 5 minutes), choose push or text.Yes, this is trivial to do in the classic app using SHM.I'm not sure how you do this in the new app. Thanks for the suggestion I should have tried it before posting or contacting the supportGood news, I fiddled with the battery and the LED came on! BENEFITS. I recently bought a used SmartThings Hub v2 along with two multipurpose sensors and a motion sensor (the squared one with the sensor in the corner). I can't find anything like this. You'll have to manually construct something using the new rules engine and POST it yourself using curl.